Page 1 of 1
Helm toggle switch plate names
Posted: Sat Oct 22, 2005 11:26 am
by mouldrp
I want to have my helm switch plates re-silk screened or engraved. The port side plate (ignition) is currently unreadable and the starboard side (horn, navigation, blower, etc.) is almost worn off as well. Would anyone have a picture or list of what they should read? I’d like to duplicate the original wording. Thanks! Sheer Folly Greenwich, CT
Posted: Sun Oct 23, 2005 5:58 pm
by Brian Davin
I have the same problem and intend to engrave them this winter. I've got the switch label information written down somewhere and will dig it up and post soon. Brian '90 Bertram 33' FBC Never Say Never Westbrook, CT (Homeport) Kinnelon, NJ (Home)
Posted: Mon Oct 24, 2005 5:54 am
by dougl33
I have had the same issue and I also have the configuration written down. I put labels over them last year (2004), but they are just about un-readable now. Does anyone know a good place to get them done? Regards, Doug L. 1986 33 Bertram FBC Queen Elizabeth Marblehead, MA
Posted: Mon Oct 24, 2005 9:23 am
by Brian Davin
I plan on inquirying at any Trophy/Awards shop that engraves everyday? Brian '90 Bertram 33' FBC Never Say Never Westbrook, CT (Homeport) Kinnelon, NJ (Home)
Posted: Mon Oct 24, 2005 11:08 am
by BECCA ROSE
Local trophy shop could handle the job, Doug there is one by my house, I will stop in and ask them some questions. Bill Dunlop "Rebecca Rose" 1988 FBC Ipswich, Massachusetts
Posted: Mon Oct 24, 2005 2:24 pm
by dougl33
Cool. Honestly, I can't believe you haven't had the problem yet. Yours is only 2 years newer than mine, and Brians is 2 years newer than yours! Regards, Doug L. 1986 33 Bertram FBC Queen Elizabeth Marblehead, MA
Posted: Mon Oct 24, 2005 2:39 pm
by BECCA ROSE
Always covered up I guess helped. Bill Dunlop "Rebecca Rose" 1988 FBC Ipswich, Massachusetts
Posted: Sun Nov 20, 2005 2:08 pm
by mouldrp
Thanks all for your comments but I still don't have the information I need to have my switch plates silk-screened. I would greatly appreciate it if someone could give me the exact wording for the switches so that I can keep the original appearance. A picture would work. Thanks! Sheer Folly Greenwich, CT
Posted: Mon Nov 21, 2005 5:34 am
by Capt. Ed
Have you called Bertram? They are very helpful to owners and should be able to provide it to you. There is a link on the link page to the "Mothership". Good luck, 1979 Bertram 33' FBC ALEXANDRA Port Richey, Florida
Posted: Sat Dec 03, 2005 5:19 am
by Rick
Here's a pic of most of my panel switches...if there's one particular you need....just let me know. [img]
http://www.bertram33.com/images/uploads ... _04_26.jpg[/img] Rick Ticket 85 SF Falmouth, MA
Posted: Sat Dec 03, 2005 2:28 pm
by dougl33
quote:Originally posted by BECCA ROSE Local trophy shop could handle the job, Doug there is one by my house, I will stop in and ask them some questions. Bill Dunlop "Rebecca Rose" 1988 FBC Ipswich, Massachusetts Bill, Did you ever stop by that trophy shop? Regards, Doug L. 1986 33 Bertram FBC Queen Elizabeth Marblehead, MA
Posted: Sun Dec 04, 2005 1:59 pm
by sbeer
Hey Rick, What gauge package do you have? Mine are vdo. I like the way yours look. Mike Mike Lawrence 81 sportfish 33' shot'n'beer
Posted: Tue Jan 17, 2006 10:32 am
by Rick
Mike, They are the Det-Mar's. I've actually been looking to replace the tach's as they're getting sticky....only way to fix 'em is to slam on top of the console.....always makes the passengers good and comfy ! But they'll be low on the priority list for at least another year, who knows....might even go the flo-scan route. Take Care, Rick Ticket 85 SF Falmouth, MA
Posted: Tue Jan 17, 2006 10:56 am
by dougl33
Rick, Don't be so prompt on your responses![;)] Regards, Doug L. 1986 33 Bertram FBC Queen Elizabeth Marblehead, MA
Posted: Tue Jan 17, 2006 11:12 am
by BECCA ROSE
Come on Doug, the guys in Key West, give him a break! Rick, hows the weather![8D] Lucky Son of a Beach! Bill Dunlop "Rebecca Rose" 1988 FBC Ipswich, Massachusetts
