Page 1 of 1
front hatch vent riser HW
Posted: Sun Aug 12, 2018 12:20 pm
by captfrank
I'm looking for the front hatch the little vent that is inside the hatch the riser arm I think you call it is totally frozen and parts also broke off. I want to get a new one anyone know where to get it?
Posted: Tue Aug 14, 2018 10:44 am
by dougl33
Frank, I'm pretty sure most of the hatch stuff came from Bomar.
Posted: Tue Aug 14, 2018 2:07 pm
by captfrank
Thanks! I have bene looking and can't seem to find the part.
Posted: Wed Aug 15, 2018 9:01 am
by IRGuy
Doug is correct... Bomar made our hatches (I believe also the side ports). A couple of years ago the fwd hatch on my B33 leaked terribly. After learning that Bomar made them I gave them a call. They were very helpful, and they still have parts available to repair our hatches. Give them a call.
Posted: Wed Aug 15, 2018 12:56 pm
by dougl33
Posted: Sun Aug 19, 2018 11:37 am
by captfrank
Thanks I sent them an email with pic. Hopefully they still have them
Posted: Wed Aug 22, 2018 1:31 pm
by captfrank
FYI they said that is not their part
Posted: Thu Aug 23, 2018 5:41 am
by dougl33
Interesting. I know I got my parts from them. Check with Dany at Hightide Marine. Maybe the 35's had used a different supplier?
Posted: Fri Aug 24, 2018 3:26 am
by No Yacht Yet
The hatches on the 33 are different from the 35,and the 42. If you find them I’m interested where. I see most guys replace with bomar similar to what’s on the 33’s. The ones on the 35 and 42 are nice because they give ventilation with out and rain coming in. I’m sure you could rebuild what you have.
Posted: Wed Aug 29, 2018 12:47 pm
by captfrank
quote:Originally posted by No Yacht Yet The hatches on the 33 are different from the 35,and the 42. If you find them I’m interested where. I see most guys replace with bomar similar to what’s on the 33’s. The ones on the 35 and 42 are nice because they give ventilation with out and rain coming in. I’m sure you could rebuild what you have. Brian 1985 Bertram 42 SF Cummins QSC 600 HP Seahorse Ellisville Harbor, Ma It's that vent rise/HW that is broken so I can't close it in rough seas thus water in vbunk. But could chalk shut but like you said good for the ventilation
Posted: Sat Sep 01, 2018 5:31 am
by Rick
This is the one that fit mine:
https://www.westmarine.com/buy/bomar--m ... ecordNum=3 Rick Ticket 85 SF Merc 454 MPI's Falmouth, MA
Posted: Sat Apr 13, 2019 6:42 am
by captfrank
quote:Originally posted by Rick This is the one that fit mine:
https://www.westmarine.com/buy/bomar--m ... ecordNum=3 Rick Ticket 85 SF Merc 454 MPI's Falmouth, MA I think thats the one that holds the main hatch not the vent