Page 1 of 1
scuppers
Posted: Fri Apr 10, 2009 4:58 pm
by Good as Gold
Hi all, I'm just about ready to go back in the water for the season and noticed the rubber on my port side scupper is torn almost all the way across. I'm hoping one of you guys knows where to find the rubber/vinyl piece,or have a good alternative material to use. I'm hoping the 33 and 42 use the same part! Thanks--Doug
Posted: Fri Apr 10, 2009 5:41 pm
by Justinf89
I'll be replacing mine soon as well, they are curled outward and hard as a rock.
Posted: Fri Apr 10, 2009 11:28 pm
by buzzk
I think High Tide sells them. Buzz
Posted: Mon Apr 13, 2009 5:14 pm
by Good as Gold
Thanks for the respones. I ordered a sheet of white rubber from Grainger today. I think it ened up costing $22.00 with shipping. I'll let you guys know how it works.---Doug
Posted: Tue Apr 14, 2009 1:31 am
by JohnD
A friend installed these on his B31 and they worked. I like the fact that they don't rely on flexibility of rubber, though may require a angled shim to work correctly.
http://www.foreandaftmarine.com/SS-SBW.htm br,
Posted: Tue Apr 14, 2009 3:26 pm
by khybskid
they worked on my 28 bert but i needed to drill new screw holes because they didnt line up with the old frame holes.
Posted: Tue Apr 14, 2009 4:03 pm
by Good as Gold
Those look like they would work well. The problem is I'm going in the water monday and I don't want to start another project! I'll take a look at those in the fall. Thanks for the link.---Doug
Posted: Wed Apr 15, 2009 7:13 am
by JohnD
You're welcome Doug, Congrats on getting wet!