Page 1 of 1
trim rings for exhaust thru hull
Posted: Tue Mar 04, 2008 1:43 am
by Crabby
I was wondering if anyone knew where I could find 6" dia. trim rings for my fiberglass thru hull exhaust ports? Thanks, Crabby
Posted: Wed Mar 05, 2008 6:14 am
by photo finish
High Tide
Posted: Wed Mar 05, 2008 7:52 am
by dougl33
That's High Tide marine in Miami:
http://www.hightidemarine.cc/index.htm Regards, Doug L. 1986 33 Bertram FBC Queen Elizabeth Marblehead, MA [img]
http://www.bertram33.com/photogallery/p ... sabeth.jpg[/img]
Posted: Wed Mar 05, 2008 2:33 pm
by Crabby
Thank you very much! Crabby
Posted: Wed Mar 12, 2008 3:38 pm
by CB35
I made my own for my 28B. I used the broken up one for a pattern. Laid it up with fiberglass and polyester. Polyester is cheap compaired to epoxy. It took time and was messy; but at the time I could not find what I wanted. I am sure I could have made a mold and just poured polyester with glass fibers and some cabosil. Quick easy and not as much sanding. Charlie
Posted: Thu Mar 13, 2008 2:17 am
by Crabby
thanks charlie but i already ordered 2 from hightide marine. crabby
