Page 6 of 6
Posted: Thu Jul 21, 2005 10:35 am
by BECCA ROSE
That... is quite a dance floor you got there Tim!! Bill Dunlop "Rebecca Rose" 1988 FBC Ipswich, Massachusetts
Posted: Sun Jul 24, 2005 1:36 pm
by robert watters
Really a superb job Tim. As an amateur cabinet maker I've got to ask - did your carpenter tongue and groove each plank or did he butt edge with a little camfer at the top of each plank and then glue and screw directly to the fiberglass?
Posted: Sat Jul 30, 2005 1:43 pm
by photo finish
Robert, The planks are tongue and grooved and glued down also a few pin nails were used in some areas that needed it. Tim Stamm Photo Finish 1981 33' Bertram FBC