trim rings for exhaust thru hull

Crabby · Post by **Crabby** » Tue Mar 04, 2008 1:43 am

I was wondering if anyone knew where I could find 6" dia. trim rings for my fiberglass thru hull exhaust ports? Thanks, Crabby

photo finish · Post by **photo finish** » Wed Mar 05, 2008 6:14 am

High Tide

Post by **dougl33** » Wed Mar 05, 2008 7:52 am

That's High Tide marine in Miami: http://www.hightidemarine.cc/index.htm Regards, Doug L. 1986 33 Bertram FBC Queen Elizabeth Marblehead, MA [img]http://www.bertram33.com/photogallery/p ... sabeth.jpg[/img]

Crabby · Post by **Crabby** » Wed Mar 05, 2008 2:33 pm

Thank you very much! Crabby

CB35 · Post by **CB35** » Wed Mar 12, 2008 3:38 pm

I made my own for my 28B. I used the broken up one for a pattern. Laid it up with fiberglass and polyester. Polyester is cheap compaired to epoxy. It took time and was messy; but at the time I could not find what I wanted. I am sure I could have made a mold and just poured polyester with glass fibers and some cabosil. Quick easy and not as much sanding. Charlie

Crabby · Post by **Crabby** » Thu Mar 13, 2008 2:17 am

thanks charlie but i already ordered 2 from hightide marine. crabby