generator
-
BECCA ROSE
- Commodore

- Posts: 1301
- Joined: Thu Feb 10, 2005 12:46 pm
- Location: USA
Very very little. I would guess 1/2 gallon per hour. Bill 1988 33 FBC Ipswich, Ma. > ~------- [img]http://www.bertram33.com/photogallery/p ... a_Rose.jpg[/img]
Bill 1989 33 FBC Cummins 6BTA's ><)))))*> ~------- 

I had heard the 1 gallon per hour under load comment before. Regards, Doug L. 1986 33 Bertram FBC Queen Elizabeth Marblehead, MA [img]http://www.bertram33.com/photogallery/p ... sabeth.jpg[/img]
Regards, Doug L.
1986 33 Bertram FBC Cummins 6BTA's Queen Elizabeth
Marblehead, MA

1986 33 Bertram FBC Cummins 6BTA's Queen Elizabeth
Marblehead, MA

Kohler 8 KW diesel genny, less than .5 gal/hr under load Sean Burlingham "Island Time" 1987 Bertram 33 SF Melbourne, FL SBurlingham@cfl.rr.com [img]http://www.bertram33.com/photogallery/p ... d_Time.jpg[/img]
"Island Time" 1987 Bertram 33 SF 3208T Cats


I think the exact rate on mine was 0.46 gallons at 80% load. With an 8 KW, I can have everything running full blast and still only use 80% of its capacity. I don't normally run the HW heater at all, just the A/C, and most of the other high-demand things are usually not running either (microwave, battery charger) so I'm probably burning much less than .46 on average. I installed a big genny in anticipation of a big icemaker that will shoot ice into a cooler and actually fill it in a few hours, along with a freshwater maker that would feed it, so I'm not carrying around 70 gallons of water all the time. One of these days... Sean Burlingham "Island Time" 1987 Bertram 33 SF Melbourne, FL SBurlingham@cfl.rr.com [img]http://www.bertram33.com/photogallery/p ... d_Time.jpg[/img]
"Island Time" 1987 Bertram 33 SF 3208T Cats


quote:Originally posted by dougl33 I think the most important thing while running it is to make sure that you constantly keep a load on it. Running it with out a load is not good. I think that is the case for all diesels, spinning the mains at the dock is not good enough. They need to move the boat around, as often as possible. I can't even get mine to operating temperature without a load, even at 2000 RPM for 10 minutes. Diesel boats need to move Sean Burlingham "Island Time" 1987 Bertram 33 SF Melbourne, FL SBurlingham@cfl.rr.com [img]http://www.bertram33.com/photogallery/p ... d_Time.jpg[/img]
"Island Time" 1987 Bertram 33 SF 3208T Cats


I have never used the hot water on my boat - but the A/C runs a lot. Basically its the A/C during the day, and a few lights and occasional microwave at night. My rat trap of a generator has had work - wobbles around, makes a lot of noise, looks like crap, but it just keeps going so I dont mess with it to much. I had it tuned up (valve adjustment, belts, hoses, fuel pump) a few years ago - then just regular maint and it looks like it wants to die, sounds like it wants to die - but starts right up amd runs all day.
well guys my mech. installed the rebuild carb today and still the same problem my neighbour told me it looks like my GOVENOR that adjust the rps for more or less load is what is not working so i guess that i must give in and get a generator tech out to my boat and GIVE IT TO ME.. thanx forthe help i will let you guys know what was wrong in case it will help someone out in the future...Pete. ps if you have a mom i wish them a happy moms day


