salon lockset

kevin gillespie · Post by **kevin gillespie** » Tue Apr 01, 2008 4:13 pm

does anyone have an option on replacing the lockset on the salon double doors,other than paying 300 to high tide.

BECCA ROSE · Post by **BECCA ROSE** » Tue Apr 01, 2008 7:09 pm

300.00? That's nuts. Bill 1989 33 FBC Ipswich, Ma. > ~------- [img]http://www.bertram33.com/photogallery/p ... a_Rose.jpg[/img]

lobsta1 · Post by **lobsta1** » Tue Apr 01, 2008 7:40 pm

I know I have one of the oldest B33s, but I can't picture any B33 with double doors. Please enlighten me. Al

buzzk · Post by **buzzk** » Wed Apr 02, 2008 3:49 am

I don't have the double doors, but I took my lock apart many times and it would work for a while but it never stayed fixed. I was in a hurry and couldn't find anything in any catalogs that would fit, so I gave in and bought it from High Tide. Even then I had to adjust the lock to make it work. Buzz buzzk 1988 Bertram 33 FBC Buzz Off Morehead City, NC

Post by **dougl33** » Wed Apr 02, 2008 6:06 am

I've never seen any 33 with double doors. Regards, Doug L. 1986 33 Bertram FBC Queen Elizabeth Marblehead, MA [img]http://www.bertram33.com/photogallery/p ... sabeth.jpg[/img]

JohnD · Post by **JohnD** » Wed Apr 02, 2008 6:29 am

Guys, I believe Kevin has a B35 (pre-80 had the double doors). Kevin, I got mine from Richard Kidd about 6yrs ago and I believe it was under $200 I believe his number is 305.633.9761 br, John D "Lady D" Bertram 35 Pasadena MD

Post by **dougl33** » Wed Apr 02, 2008 7:05 am

Not to high jack the thread, but how's the re-power going John? Is there a light at the end of the tunnel? Regards, Doug L. 1986 33 Bertram FBC Queen Elizabeth Marblehead, MA [img]http://www.bertram33.com/photogallery/p ... sabeth.jpg[/img]

JohnD · Post by **JohnD** » Wed Apr 02, 2008 1:38 pm

Doug, Thanks for asking, the port motor is in, new structs today and install port motor tomorrow. I hope to give a better update with pics on my repoer thread. Kevin, I have a replacement door and may not be using my sliders, but won't know for another month for sure. If that's the case, you can have my old hardware it was replaced around 2001 and I think it's in decent shape. br, John D "Lady D" Bertram 35 Pasadena MD

kevin gillespie · Post by **kevin gillespie** » Thu Apr 03, 2008 12:42 pm

thanks john i appreciate the offer.unfotunately i ripped out the lockset,now all i have is a bungy cord holding them closed.both kidd and high tide are bout the same price.so i ordered a set today.i would like to see what your going to do with a new door ,because i am eventually going to change that double door configuration.