Autopilot usage??
Autopilot usage??
When I bought "Phoenix" there was supposedly an autopilot (Autohelm Model 100) on board. Technically there was, but it had been disconnected.. the previous owner had cut the wires connected to the control module when it failed. (This was his response to almost anything that broke.. just disconnect it and leave the parts installed.) I have removed all the components, and was told by the techs at Raymarine/Autohelm yesterday that these components are so old it is almost a waste of money to try to rebuild and reinstall them. There is a possibility that these components are 10-15 years old. The pump unit is supposedly the only component that could be used with present day compoonents, and when I tested it I found corrosion had caused the motor to be frozen, so that is useless. My question is, how many of you who have autopilots use them regularly, and is it really worth perhaps $1,500 to $2,000 to replace everything? I have used them on sailboats in the open ocean, but having something steer your boat at maybe 5-6 knots is a lot different that at 15-20 knots. I never felt comfortable depending on them.. I was always concerned that I was not sure what was in the water ahead of us.. freak waves, trash, fishing markers, etc. I have plenty of other things to spend my money on right now, so this is not on my priority list, but I would appreciate hearing your comments! Frank B - IRGuy@aol.com "Phoenix" 1983 FBC Wilmington, NC
Frank B - IRGuy@aol.com "Phoenix" 1983 FBC Cummins 6Bs - 315HP Wilmington, NC
The guys that have them seem to love them and use them often. Many that don't have them (myself included) could never imagine needing one. While I don't fish (and therefore don't have a long run to the canyons), I do cruise. My destinations frequently require 3-6 hours at the helm. With all the lobster pots we have up here it would be a waste of money for me. As I usually head south for the cape cod canal, this requires passing Plymouth where you can almost walk on the pots without getting your feet wet. While I never head to Maine (too cold) I understand that they are even worse up there. Regards, Doug L. 1986 33 Bertram FBC Queen Elizabeth Marblehead, MA [img]http://www.bertram33.com/photogallery/p ... sabeth.jpg[/img]
Regards, Doug L.
1986 33 Bertram FBC Cummins 6BTA's Queen Elizabeth
Marblehead, MA

1986 33 Bertram FBC Cummins 6BTA's Queen Elizabeth
Marblehead, MA

I have a simrad AP16 and I use it all the time.I never leave the helm while in auto plus I usually have another person on watch. Next time you are out look at your wake and see how straight of a line you are traveling. With the auto pilot boat runs straight in most sea conditions and speeds. I would never have a boat without one. Michael 33SF
See, its just like I said. Regards, Doug L. 1986 33 Bertram FBC Queen Elizabeth Marblehead, MA [img]http://www.bertram33.com/photogallery/p ... sabeth.jpg[/img]
Regards, Doug L.
1986 33 Bertram FBC Cummins 6BTA's Queen Elizabeth
Marblehead, MA

1986 33 Bertram FBC Cummins 6BTA's Queen Elizabeth
Marblehead, MA

Agree with both Doug and Michael. For trips down to the Keys dodging crab pots defeats the purpose of the autopilot. However I am extremely happy to have it during 8 uninterrupted hours trips to the Bahamas, throughout which time I take naps while my wife is on watch. For the kind of boating I do I would not be without one. Mine is the same as Michael's and have it connected to both plotters in case one fails. Jose Jaen "Blue Chip" 1993 33FBC Miami FL [img]http://www.bertram33.com/photogallery/p ... p_Jaen.jpg[/img]
Jose Jaen "Blue Chip" 1993 33FBC Panama City, Panama 

-
No Yacht Yet
- Captain

- Posts: 260
- Joined: Thu Feb 15, 2007 1:32 am
- Location: USA
Love my autopilot, No good for lobster pot dodging though but running through the Canal or down Buzzards Bay it's always on. Gives me more time to look around at gages etc etc. I can make 10 or 20 degree corrections from the pad, imediate responce fron it. Would not use it in rough condions. Sit in the helm chair with my feet up. Wish it had a hand held remote so I wouldn't have to lean forward.....Lazy Brian
Brian 1985 Bertram 42 SF Cummins QSC 600 HP Seahorse Ellisville Harbor, Ma
I had one and it gave up the ghost. I used it whenever I could, here in the chesapeake things get tight and there are lots of crab pots. I had the Robertson AP1000 and it had a dial to adust steering and I used that just as the wheel to get around pots. I used it for slow trolling and creek crusing as well. I will have another one at some point, as soon as the repower quits bleeding me[B)] Of course when it takes half the time to get somewhere I may not need an AP[:D] John D "Lady D" Bertram 35 Pasadena MD
John D "Lady D" B35 "Jabba Jaws" B20 Pasadena MD
-
photo finish
- Commodore

- Posts: 1551
- Joined: Mon Sep 27, 2004 3:55 pm
- Contact:
-
kevin gillespie
- Lieutenant

- Posts: 34
- Joined: Mon Nov 05, 2007 1:32 pm
- Location: USA
-
BillChaser
- Lieutenant

- Posts: 57
- Joined: Sat Feb 09, 2008 12:52 pm
- Location: USA
I have always enjoyed using it for offshore runs. I believe it offeres safety if used properly. By using it you cna truly dedicate your time more closely to what is going on around you. I do understand that having it can make you lazy, but I find myself more diedicated to concentrating on what is in the water directly in front of me rather than concentrating on wave or sun angle to steer a straight course. It will also increase your fuel effeciency, because it is doubtful that most of us can steer as accurately as the pilot
Bill Diller Bertram owner Soon Beaufort, NC



