Props

[BECCA ROSE]

This is as good a place as any to ask. I need a pair of 21x22 (or close) three blade nibral props for 1.5 inch shafts. I got a price of 1,300 a piece, trying to find a used pair online. Any help would be appreciated! Bill 1988 33 FBC Ipswich, Ma. > ~------- [img]http://www.bertram33.com/photogallery/p ... a_Rose.jpg[/img]

[Captain Dan McClarren]

Bill, I presently having my boat re-power with Cummins Diesel at Point Lookout Marina in Ridge Maryland. They still have my old propellers “which are in excellent conditionsâ€� and I’m sure they would want to sell them. Propeller information Michigan 21 x 21 x 1 3/8 in. 3 blades "nibral" Phone Number is (877) 384-9716 contact person is Tammy

[BECCA ROSE]

Thanks Dan, my bad, I didn't mention the shaft size, I need 1 1/2 shafts. Bill 1988 33 FBC Ipswich, Ma. > ~------- [img]http://www.bertram33.com/photogallery/p ... a_Rose.jpg[/img]

[IRGuy]

Bill... Check with H and H.. I wonder if they can bore the tapers on these props out to 1 1/2"? I suspect they can also be repitched. Frank B - IRGuy@aol.com "Phoenix" 1983 FBC Wilmington, NC

[BECCA ROSE]

Will do! Bill 1988 33 FBC Ipswich, Ma. > ~------- [img]http://www.bertram33.com/photogallery/p ... a_Rose.jpg[/img]

[TBonedad]

I'll double-check the size of the ones I removed when I repowered. I know they're 1 1/2" bore, but the pitch and diameter I can't remember right now. If they'll work for you I'll give you a REAL good deal on them. Fraser

[BECCA ROSE]

Are they Nibral?? Bill 1988 33 FBC Ipswich, Ma. > ~------- [img]http://www.bertram33.com/photogallery/p ... a_Rose.jpg[/img]

[BECCA ROSE]

Fraser?? Bill 1988 33 FBC Ipswich, Ma. > ~------- [img]http://www.bertram33.com/photogallery/p ... a_Rose.jpg[/img]

[TBonedad]

Sorry, missed your last post, and missed the reference to NiBral. They aren't NiBral. I haven't been to storage to get the dimensions, but I'll let you know asap. BTW, most 1 3/8" props can be bored to 1 1/2".