Where have you been the last 15 years? I am 95% positive that you have a Hynautic H50 helm. I believe Hynautic was taken over by Seastar. Many places will rebuild the H50 or you can buy a kit & do it yourself. Just be careful you don't drop the ball bearings everywhere.
Al
Search found 1154 matches
- Sun Apr 28, 2024 8:40 am
- Forum: Bertram 33 Convertible
- Topic: 1977 FBC hydraulic steering pump
- Replies: 2
- Views: 47
- Sun Apr 07, 2024 10:55 pm
- Forum: Bertram 33 General
- Topic: Prop pitch
- Replies: 6
- Views: 205
Re: Prop pitch
If it was me, I would start with a clean bottom. If the boat has been out of the water all winter then the hull has probably dropped 500 lbs. in water weight. Those two might give you back your RPMs. Are your props dinged? Your props might just need to be reconditioned.
Good luck
Al
Good luck
Al
- Fri Feb 09, 2024 9:29 am
- Forum: Bertram 33 General
- Topic: Replace/refurbish flybridge doors
- Replies: 9
- Views: 430
Re: Replace/refurbish flybridge doors
Yes, there is no backer. I might be going to the boat on Sunday& will check the thickness.
Al
Al
- Mon Feb 05, 2024 11:08 am
- Forum: Bertram 33 General
- Topic: Replace/refurbish flybridge doors
- Replies: 9
- Views: 430
Re: Replace/refurbish flybridge doors
Mike I "think" it is 1/4".
Al
Al
- Sat Feb 03, 2024 9:24 am
- Forum: Bertram 33 General
- Topic: Replace/refurbish flybridge doors
- Replies: 9
- Views: 430
Re: Replace/refurbish flybridge doors
Mike, they are just a simple rectangle hinged on the outboard side so they swing open against the side of the bridge. They have a simple surface mounted slide latch to keep them closed. There is a piece of poly carbonate screwed in above to direct water away at the top. I probably won't be back to t...
- Fri Feb 02, 2024 4:42 pm
- Forum: Bertram 33 General
- Topic: Replace/refurbish flybridge doors
- Replies: 9
- Views: 430
Re: Replace/refurbish flybridge doors
Hi Mike, don't you have the dark plexiglass doors? Anything wrong with them or do you just want something else?
Al
P.S. Did you ever get your windlass installed?
Al
P.S. Did you ever get your windlass installed?
- Thu Nov 02, 2023 4:21 am
- Forum: Bertram 33 Sportfisher
- Topic: repair after storm
- Replies: 6
- Views: 516
- Sun Oct 15, 2023 9:07 am
- Forum: Bertram 33 General
- Topic: Breaking the ice
- Replies: 6
- Views: 593
Re: Breaking the ice
Hi Tony, my 1st choice would be the impellor. Think about it. Out then in again 13 gal. per engine. The pumping back in is with cold oil. Second choice would be an air look on the normal output side. Good luck Al P.S If a line from one of the engines is easily accessible pull that off & see if y...
- Wed Oct 04, 2023 12:38 pm
- Forum: Bertram 33 Convertible
- Topic: Leak
- Replies: 4
- Views: 889
Re: Leak
Doug, don't remember what the cabin looks like. Do you have a vinyl liner on the hull side. Could it be leaking in a cleat, hull joint, etc. and then running down behind the vinyl? Can you sprinkle talc powder & see if then you pick up a trail. Just suggestions. Good luck Al P.S. I'm glad somebo...
- Wed Jun 28, 2023 9:44 am
- Forum: Bertram 33 General
- Topic: Maxwell windlass
- Replies: 2
- Views: 421
Re: Maxwell windlass
On my 1978 FBC the piece I cut out for the windlass was about 31mm thick. Instead of a vertical windlass have you considered going to a horizontal type windlass? Everything sits above deck. You might have to get longer studs. To cover the existing holes you could use a piece of starboard as a pad. G...
- Tue Jun 06, 2023 12:29 pm
- Forum: Bertram 33 General
- Topic: Windlass Install with Pulpit
- Replies: 11
- Views: 851
Re: Windlass Install with Pulpit
Mike, if it's that close, I wouldn't worry about it. The anchor well on our boats is so deep it shouldn't be a problem. Unless you intend to put over 600' of rode in there.
Al
Al
- Tue Jun 06, 2023 9:59 am
- Forum: Bertram 33 General
- Topic: Windlass Install with Pulpit
- Replies: 11
- Views: 851
Re: Windlass Install with Pulpit
Mike, general rule of thumb is to mount it over the deepest part of the anchor well. I don't have a pulpit so I had no problem doing that. Don't really remember the details as it was over 20 years ago. I did reinforce under the deck with 3/4" plywood epoxied in place. Also used a 1/4" alum...
- Fri Mar 17, 2023 7:17 pm
- Forum: Bertram 33 General
- Topic: Where is everybody?
- Replies: 8
- Views: 867
Re: Where is everybody?
Unfortunately there are only a few of us left that come on here.
Al
Al
- Tue Feb 07, 2023 11:07 am
- Forum: Bertram 33 General
- Topic: Battery Charger
- Replies: 11
- Views: 834
Re: Battery Charger
Mike, my old battery box was rotted so I built a new one. I have 3 batteries with long measurement running athwart ship & I have one beside them running fore n aft. They are Grp 31 Duracell batteries. At my age they are much easier to handle than the old Grp 4d's I had in there. They also last l...
- Wed Feb 01, 2023 9:13 am
- Forum: Bertram 33 General
- Topic: Battery Charger
- Replies: 11
- Views: 834
Re: Battery Charger
I forgot to paste in the link to what I have.
[url]https://www.promariner.com/en/p/63140/P ... -1240P[url]
[url]https://www.promariner.com/en/p/63140/P ... -1240P[url]