Bertram33 User Forum

Oh BTW... I have spoken with High Tide Marine in the past and will probably end up with that route. I am in RI and hope to do something locally and sooner. The Giants are here!! I did the straight edge test with the board clamped to the rudder while spinning the prop. It appears that the shaft will ...

Had a bad day today..... Hit a log and caused damage to the port running gear. I put on the spare prop and the vibration continued. I plan on hauling out on Thursday. I anticipate a shaft and/or strut problem. I am certain to need a cutlass bearing. Any suggestions on where to look for parts. The pr...

This site is priceless! I have been reading the forum and have not had to ask any questions since those when I joined. I am ordering new doors from Ajr very soon! Thanks for being a great group. Keep it up! Chris

I have 4 Penn 50 VSW's complete with rods. I used them only this season. The rods are Cal Star blanks (all custom). The rods are black with balck aluminum but's. I have been watching auctions and sales on other sitres. I am thinking $500 per set. I would like the set to go together. I paid $800 for ...

Inch and 3/8th's it will be! The deck in the salon was raised (only where the engines are). It should be fun to reconfigure the layout. Any suggestions on where to find cabinets and furniture? I want marine style furniture not seats found in West Marine. Interesting that the displacement for the 33 ...

ED....John, Thanks for the welcome. John, I too have a 72. 1. Yes, the gelcoat is worn to the tune of painting. I may have an out. I have a good friend who paints cars. He offered if I do the prep work. That I can do.....Saving there!! 3208T with 265hp out of each (I am fine with that) at 2250 rpm's...

I am looking to complete the repower. I bought the boat with 3208 Cat's. They did not change the inch and 3/8th shafts. I need to: 1. Change running gear 2. Take off tower and put up new hard top. 3. Center the helm chair and build a pod with a wrap around console 4. PAINT IT! The good news is that ...